Publicité
2
Remove cabinet base, if installed. Mark the
fastening points on the inside of the cabinet and
use a bradawl to make indentations where the
holes are to be. To help you mark the fastening
points, use the mounting piece provided.
Body wall thickness: 5/8" (16 mm)
1
Screw the mounting pieces to the body on the
¨
left and right.
2
Remove the tabs from the bottom of the
©
mounting pieces.
Body wall thickness: 3/4" (19 mm)
1
Fold out the tabs on both of the mounting
¨
pieces.
2
Screw the mounting pieces to the body on the
©
left and right.
3
Remove the tabs from the bottom of the
ª
mounting pieces.
Preparing the appliance
1
Connect the enclosed power cord to the
¨
appliance.
2
Use the strain relief to secure the power cord in
©
place.
21
Publicité
