Cleaning The Charging Cradle; Replacing The Brush Head - Silk-n ToothWave H7001 Mode D'emploi

7.3 Cleaning the charging cradle

1. First disconnect the charging cradle (#7) from the mains
supply and remove the toothbrush from the charging
EN
cradle (#7).
2. Next, remove the transparent base. To do this, turn the
charging cradle (#7) upside down. Remove the transparent
base by pressing the clips outwards.
3. Clean both parts with a damp cloth and dry them. Place
the charging cradle (#7) back, and press down firmly. You
will hear it click into place.

7.4 Replacing the brush head

Replace the brush head (#1) when any of these apply:
U
another person wishes to use the device, or
U
you have used the same brush head (#1) for 3 months, or
U
the bristles are damaged or worn.
12