What To Expect With The Device; Get Started - Silk-n ToothWave H7001 Mode D'emploi

5. What to expect with the device

During or after using the device you may:
EN
U
Feel pain, if you have cavities or any teeth condition that
requires dental treatment. If you do feel pain, consult your
dentist.
Stop using the device if you experience excessive bleeding
Z
after use, or if bleeding continues after one week of regular
use.

6. Get started!

1. Rinse the bristles under lukewarm water.
2. For best results, apply a generous amount of toothpaste.
You can use any commercial toothpaste.
3. Hold the handle (#2) firmly, and turn on the device. Short
press the control button (#3) as many times as needed to
select your treatment mode.
4. Gently press the bristles against the teeth, and move the
brush in circular movements, slowly and systematically
from tooth to tooth, gently massaging the gums. Make
sure the bristles are always in good contact with your teeth.
The device
Z
and gums. Brush gently, and apply only light pressure
when brushing. Do not scrub.
5. Brush all surfaces of the teeth for 2 minutes. You will feel a
slight vibration every 30 seconds (1 vibration at 30 seconds,
2 vibrations at 60 seconds and so on). After the vibration(s),
you can move to another section of the mouth (refer to
section 4. Treatment plan). After 2 minutes, the device will
shut down automatically.
comes with soft bristles to protect your teeth
10