Charging - Silk-n SONICYOU DCA02 Mode D'emploi

Be very careful when opening it.
EN
1. Take the product out of the packaging.
2. Check to make sure that all parts are included (see Fig. A).
3. Check whether the product or individual parts are damaged. If
this is the case, do not use the product. Contact our customer
service.

5 Charging

WARNING! RISK OF INJURY!
• Do not charge the product when it is wet.
Make sure it is dry before charging.
• Only charge the product with the supplied
USB cable.
• Only charge the product at temperatures
between 0 and 40 °C.
• Always unplug the product after charging
has been completed.
• Fully charge the product before first use and when the
• The bottom battery indicator light
• The product cannot be used during charging.
1. Open the two protective covers
product (see step 1 in Fig. B).
You may need the help of a tool (e.g. a small screwdriver) to
open the protective covers.
2. Plug the smaller end of the USB cable
port
5
3. Plug the larger end of the USB cable into the USB port of a
compatible USB power source (e.g. a USB power adapter) for
charging. Charging starts automatically. Refer to the battery
indicator lights
11
battery power is low.
operation when the battery power is low. Recharge
the product if this is the case.
of the product (see step 2 in Fig. B).
for the charging progress.
4
flashes during
4
at the bottom of the
9
into the charging
7