Checking The Product And Package Contents; Charging - Silk-n OPTIFLOSS ND -DC01 Mode D'emploi

• Never fill the housing with liquid.
EN
• Stop using the product if its plastic parts
exhibit cracks or breaks or are deformed.
Only replace damaged parts with
corresponding original spare parts.
4 Checking the product and package
contents
NOTICE! RISK OF DAMAGE!
• If you are not cautious when opening the
packaging with a sharp knife or other pointed
objects, you may quickly damage the product.
Be very careful when opening it.
1. Take the product out of the packaging.
2. Check to make sure that all parts are included (see Fig. A).
3. Check whether the product or individual parts are damaged. If
this is the case, do not use the product. Contact our customer
service.

5 Charging

WARNING! RISK OF INJURY!
• Charge only with the supplied USB cable and
USB wall adapter.
• Only charge the product at temperatures
between 0 and 40 °C.
• Fully charge the product before first use and when the
• The top indicator light
• The product cannot be used during charging.
11
battery power is low.
when the battery power is low. Recharge the product.
flashes during operation
15