SilverCrest 416131 2210 Mode D'emploi page 18

NOTE
► You can order suitable bags and containers separately . Please refer to
section "Ordering replacement parts" .
► The vacuum hoses u and adapters i/o/p are also compatible with
bags and containers made by other manufacturers .
Adapters
Adapter A i
Adapter B o
Adapter C p
Without adapter
*CASO is a registered trademark of Caso Holding GmbH .
**FoodSaver is a registered trademark of Sunbeam Products, Inc .
Vacuuming sealing bags
1) Connect the vacuum hose u onto the suction fitting
2) Select the appropriate adapter A/B i/o for the bag you want to vacuum
and attach it to the vacuum hose u .
3) Close the appliance lid 1 . Ensure that both corners of the appliance lid 1
click closed . If necessary, press them down once again on the markings
and
4) Close the bag to be vacuum sealed carefully . Vacuum sealing only works
properly if the bag is completely closed off . Position the bag so that the
extraction opening of the bag is lying on a smooth surface .
5) Press the adapters A/B i/o firmly onto the round extraction opening on
the bag .
6) Press the
sucks the air out of the bag . As soon as all the air is sucked out, the control
lamp z goes out .
7) You can now remove the adapter A/B i/o from the bag .
SV 125 C6
e .g . suitable for
CASO* (VacuBoxx series), Ernesto,
various bags with a valve
FoodSaver** (FFC02XX, FFC002X, 003X,
005X, 008X, 010X storage containers,
lunchbox set T020-00024), various bags
with a valve
CASO* (vacuum container set, wine
stoppers), FoodSaver** (container set
FSC003)
FoodSaver** (wine stopper, marinating
box)
so that the appliance lid 1 clicks into place and locks shut .
button z . The control lamp z lights up and the appliance
9 of the appliance .
GB │ IE │ 15 ■