Bose L1 Pro8 Guide Du Propriétaire page 6

System Setup
System Setup
Connections and Controls
VOLUME
TREBLE
BASS
REVERB
q
w
1
e
MUTE
MIC
r
INST
OFF
INPUT
t
PHANTOM
y
u
LINE OUT
i
o
a
6 • English
VOLUME VOLUME
TREBLE TREBLE
BASS BASS
REVERB
2 3
MUTE MUTE
MIC
INST
OFF
INPUT AUX
SYSTEM EQ
OFF
LIVE
MUSIC
SPEECH
PUSH
Channel Parameter Control: Adjust the level of volume,
q
treble, bass, or reverb for your desired channel. Press the
control to switch between parameters; rotate the control
to adjust the level of your selected parameter.
Signal/Clip Indicator: The LED will illuminate green when
w
a signal is present and will illuminate red when the signal
is clipping or the system is entering limiting. Reduce the
channel or signal volume to prevent signal clipping
or limiting.
Channel Mute: Mute the output of an individual channel.
e
Press the button to mute the channel. While muted, the
button will illuminate white.
Channel ToneMatch Button: Select the ToneMatch
r
preset for an individual channel. Use MIC for
h
microphones and use INST for acoustic guitar. The
corresponding LED will illuminate white while selected.
Channel Input: Analog input for connecting microphone
t
g
(XLR), instrument (TS unbalanced), or line level (TRS
balanced) cables.
f
Phantom Power: Press the button to apply 48-volt power
y
to channels 1 and 2. The LED will illuminate white while
phantom power is applied.
d
USB Port: USB-C connector for Bose service use.
u
Note: This port is not compatible with
Thunderbolt 3 cables.
XLR Line Output: Use an XLR cable to connect the line-
i
s
level output to a Sub1/Sub2 or another bass module.
ToneMatch Port: Connect your L1 Pro to a T4S or T8S
o
ToneMatch mixer via a ToneMatch cable.
CAUTION: Do not connect to a computer or
phone network.
Power Input: IEC power cord connection.
a
Standby Button: Press the button to power on the L1 Pro.
s
The LED will illuminate white while the system is on.
System EQ: Press the button to scroll through and select
d
a master EQ suitable for the use case. The corresponding
LED will illuminate white while selected.
TRS Line Input: Use a 6.4-millimeter (1/4-inch) TRS cable
f
to connect line-level audio sources.
Aux Line Input: Use a 3.5-millimeter (1/8-inch) TRS cable
g
to connect line-level audio sources.
Bluetooth® Pair Button: Set up pairing with Bluetooth
h
capable devices. The LED will flash blue while the L1 Pro
is discoverable and illuminate solid white when a device
is paired for streaming.
L1 Pro8/Pro16 Portable Line Array System • Owner's Guide
GLOBAL.BOSE.COM