Bose L1 Pro8 Guide Du Propriétaire page 9

GLOBAL.BOSE.COM
Channel 3 Controls
Channel 3 is for use with Bluetooth® enabled devices and line-level audio inputs.
Bluetooth Pairing
The following steps describe how to manually connect a Bluetooth enabled device to stream audio.
You can use the Bose app to access additional device control. For more information on the Bose app, see Bose App
Control below.
1. Turn on the Bluetooth feature on your mobile device.
2. Press and hold the Bluetooth Pair Button for two seconds. When ready to pair, the LED will flash blue.
3. Your L1 Pro will be visible in your device list on your mobile device. Select your L1 Pro from the device list. When the device
pairs successfully, the LED will illuminate solid white.
Note: Some notifications may be audible through the system while in use. To prevent this, disable notifications on your
connected device. Enable airplane mode to prevent call/message notifications from interrupting audio.
TRS Line Input
A mono input. Use a 6.4-millimeter (1/4-inch) TRS cable to connect line-level audio sources, such as mixers or
instrument effects.
Aux Line Input
A stereo input. Use a 3.5-millimeter (1/8-inch) TRS cable to connect a line-level audio source, such as mobile devices or laptops.
Bose App Control
Download the Bose app for additional device control and audio streaming. Once downloaded, follow the instructions in the
app to connect your L1 Pro. For specific information on how to use the Bose app, see the in-app help.
Features
• Adjust channel volume
• Adjust channel mixer parameters
• Adjust system EQ
• Enable channel mute
Owner's Guide • L1 Pro8/Pro16 Portable Line Array System
• Enable reverb mute
• Enable phantom power
• Access to ToneMatch preset library
• Save scenes
System Setup
English • 9