SAMES KREMLIN 40C50 AIRLESS Manuel D'instructions page 49

OPERATING PRINCIPLE
1.
The pump (A) consists of :
 an alternating air motor (B).
 an hydraulic section(C) mechanically coupled to the air motor (B).
The air motor is supplied with compressed air by means of the regulator knob (D) (pantone 382 colour
knob). The pressure is read on the gauge (E).
During its alternating movement, the air motor drives the piston of the hydraulic section (C). The fluid is
drawn in (L) and forced under pressure in (N). Due to its design, the pressure is always the one read on
the gauge (E) x the pump ratio.
 To adjust the fluid flow rate, turn the regulator knob (D) (pantone 382 colour knob) (Gauge E).
The pumps are intensive™ ones or FLOWMAX ® ones (with bellow).
SAMES KREMLIN - 1 - N° : 578.029.120-UK-1810