GYS BMW C7502654 Mode D'emploi page 42

EQUIPMENT DESCRIPTION (FIG-1)
This machine is designed to carry out the car body repair operations described below :
- spot welding on sheets using a pneumatic clamp,
- welding of sheets using a gun,
- welding of nails, rivets, washers, studs, mouldings,
- repair of bumps and impacts (hail impacts with the pliers option).
1- SD card reader
2- Interface (MMI)
3- Cooling unit
4- Overhanging arm locking support
5- Regulator
DESCRIPTION OF THE G CLAMP (FIG-2)
1- Arm locking/unlocking lever
2- Interchangeable arm
3- Gyroscope
4- Pneumatic body
5- Over-opening electrode
6- Side handle
Clamp opening : push the button (FIG 2 - 10), the opening of the clamp can be released. The electrode retracts in the clamp leaving a space of
80 mm to access the welding area instead of 20 mm when not in use.
ACCESSORIES AND OPTIONS
5 l: 062511
10 l: 052246
Welding test case
42
BMW C7502654 - GYSPOT PTI GENIUS
Coolant Protective cover
ANTI-CORROSION
WELDING PRIMER 500ml
050433
6-
7-
8-
9-
7-
8-
9-
10-
11-
12-
SD card including automatic
programs INCLUDED
077126 050914
Kit renove wifi
076822 070691
Power-on circuit breaker
Power cord
Filling cap
Cooling liquid gauge
Locking latch
Gyro lock/unlock mechanism
Over-opening button
Spot welding button
Remote settings button
Stem height control lever
Pressure sensor
052314
BMW - 6 CAPS TYPE A-32 -
Ø 16mm
085664
EN