Ergomotion quest 2.5 Manuel Du Propriétaire page 15

remote control
MEMORY PRESETS
M1
M2
M3
M3
TO PROGRAM THE PRESET POSITIONS:
Articulate the head and foot to your desired position. Next, press
and hold one of the preset buttons [MEMORY 1/2/3/4] for 7
seconds. The position is now saved.
NOTE: To restore the preset buttons back to their original factory
settings, hold FLAT and ZERO-G® simultaneously for at least 5
seconds. The original presets will be restored.
Memory Preset Position 1
Memory Preset Position 2
Memory Preset Position 3
Memory Preset Position 4
MASSAGE FEATURE
The Head + and - buttons adjust the
HEAD
head massage intensities.
The Foot + and - buttons adjust the
FOOT
foot massage intensities.
The Timer/All Off button selects
TIMER/
ALL OFF
a 10, 20, or 30 minute massage
interval. Pressing a fourth time will
turn off massage.
The Massage Type button toggles
Pulse, Wave and Constant massage
options.
The light on the top of the remote
indicates a 10, 20 or 30 minute timer
setting. Massage will automatically
shut off after 10 minutes if the
massage timer isn't set.
LIGHTING
Turn the remote flashlight On/Off.
Used to turn the underbed lights
On/Off.
13