Chicco MULTIWAY EVO Mode D'emploi page 16

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
Fit the hood in place fastening the plastic clips to the relative lock
pins (diag. 12b) and join the rear velcro straps as seen in diagram
12c.
WARNING: The hood must be fitted correctly on both sides of the
stroller. Check that it is securely fastened.
13. Open the hood as seen in diagram 13.
14. To close the hood, pull the front section towards us, as seen
in diagram 14.
15. The hood can be turned into a summer sun canopy. Undo the
zip and velcro fasteners to remove the rear flap, as seen in Diagram
15.
HOW TO CLOSE THE STROLLER
Before closing the stroller, check that the item basket is empty, the
hood is closed and its pockets are empty.
16. Pull the rear cross bar upwards to close the stroller (diagram
16).
17. Release the secondary lock, by pressing the pedal placed of the
right side of the stroller's frame with your foot (diag. 17).
18. To close the stroller completely, push the handles forward
(diag. 18).
19. The stroller has an automatic locking system. Close the stroller
ensuring that the closing device located on the side of the stroller
is locked correctly. This operation prevents the accidental opening
of the stroller (diag. 19).
The front and rear wheels can be removed to make the stroller
even more compact when closed, as illustrated in paragraph 1.
ACCESSORIES
WARNING: The accessories described below may not be available
for some versions of this product. Please read carefully the
instructions on the accessories available for the model purchased.
Bumper bar
To remove the bumper bar, press the two buttons found on the
side of the bar (diagram 20) and pull the bar towards you. Open
one side of the bumper bar only to accommodate the child in the
stroller more easily.
WARNING: Always restrain the child using the safety harness. The
bumper bar is NOT a child restraint device. WARNING: Do not use
the bumper bar to lift the product up.
Rain cover
WARNING: Take maximum care when using the rain cover.
21. To fit the rain cover, fasten the straps around the stroller's
frame, in the positions shown in diagram 21. After use, leave the
rain cover to air dry if it is wet.
WARNING: Do not use the rain cover if the stroller is not fitted
with the hood or sun canopy to prevent the risk of suffocation.
WARNING: To prevent the risk of overheating or suffocation,
never leave the stroller under the sun with the rain cover fitted
to it.
Fleece footmuff
Some versions have a fleece footmuff, which is ideal in cold
weather.
22. Place the fleece footmuff into the seat of the stroller, inserting
the safety harness into the holes, as shown in diagram 22.
23. Attach the upper part of the fleece footmuff with the specific
device, as shown in diagram 23.
WARNING: Always use the fleece footmuff with the safety
harness inserted through the appropriate holes.
24. The fleece footmuff can be used as a legcover. Remove the
rear part using the practical zip, and fix the legcover to the frame
fastening the press studs (diag. 24)
Leg cover
A leg cover can be used with certain versions.
25. To fit the leg cover, thread it under the bumper bar and fasten
the lower end to the leg rest (diag. 25A), now fasten the straps to
the frame tubes, as seen in diagram 25B.
Carry strap
The stroller is fitted with a practical carry strap attached near the
left stroller handle (diag. 26). The carry strap is designed to make
carrying small personal items easier. Maximum capacity: 500g .
WARNING: The pictures and instructions contained in the booklet
refer to the complete stroller model. Some of the components
and functions described here may not be available for the model
purchased.
16
AV
IM
ST
AT
LA
DO
FO
DU
NE
NI
AD
• A
s
• A
q
c
c
a
e
e
• A
s
t
d
• A
c
• A
d
t
g
s
m
• A
p
• E
p
y
p
• P
m
p
• E
s
t
• N
p
• C

Publicité

Table des Matières
loading

Table des Matières