Skil 2636 Notice Originale page 14

ENVIRONMENT
• Do not dispose of electric tools,
accessories and packaging
together with household waste
material (only for EU countries)
- in observance of European Directive
2012/19/EC on waste of electric
and electronic equipment and its
implementation in accordance with
national law, electric tools that have
reached the end of their life must be
collected separately and returned
to an environmentally compatible
recycling facility
- symbol 7 will remind you of this
when the need for disposing occurs
! remove the batteries before
disposal of the tool
• Removing/disposing of batteries y
! only remove the batteries if they
are completely empty
- protect battery terminals with heavy
tape to prevent short-circuit
- dispose of the batteries at an official
collection point for batteries
! batteries may explode when
disposed of in fire, so do not
burn battery for any reason
NOISE / VIBRATION
• Measured in accordance with EN
62841 the sound pressure level of this
tool is <70 dB(A) (uncertainty K = 3
dB) and the vibration <2.5 m/s² (triax
vector sum; uncertainty K = 1.5 m/s²)
• The vibration emission level has
been measured in accordance with
a standardised test given in EN
62841; it may be used to compare
one tool with another and as a
preliminary assessment of exposure
to vibration when using the tool for the
applications mentioned
- using the tool for different
applications, or with different or
poorly maintained accessories, may
significantly increase the exposure
level
- the times when the tool is switched
off or when it is running but
not actually doing the job, may
significantly reduce the exposure
level
! protect yourself against
the effects of vibration by
maintaining the tool and its
accessories, keeping your hands
warm, and organizing your work
patterns
b
Visseuse sans fil
INTRODUCTION
• Cet outil avec rotation à droite/
gauche est conçu pour le vissage et le
perçage préalable au bois
• Cet outil n'est pas conçu pour un
usage professionnel
• Lisez et conservez ce manuel
d'instruction 3
CARACTERISTIQUES
TECHNIQUES 1
Couple max. vissage dur suivant
ISO 5393 : 7Nm
ELEMENTS DE L'OUTIL 2
A Chargeur
B Interface du chargeur
C Indicateur de niveau de
charge de la batterie
D Interrupteur marche/arrêt
E Commutateur pour inverser
le sens de rotation
F Indicateur du sens de
rotation sélectionné
G Porte-embout magnétique
H Lampe
J Boîte d'embouts
K Câble du chargeur
SECURITE
AVERTISSEMENTS DE SECURITE
GENERAUX POUR L'OUTIL
ELECTRIQUE
AVERTISSEMENT Lisez tous les
-
avertissements de sécurité, toutes
les instructions, illustrations et
caractéristiques fournies avec cet
outil électrique. Le non-respect du suivi
14
2636