SOLIS GRILL & MORE Mode D'emploi page 81

How to remove resp. install the grill plates
Your grill is equipped with two
●
release buttons for the grill plates.
With them, you can separately remove
the upper and lower grill plates for
cleaning.
Your grill must be absolutely cool before you remove the grill plates. Set
●
the height slider to the OPEN position. Open the upper grill plate with the
metal handle so that it is positioned at an angle of approx. 90°.
To remove the lower grill plate,
●
push the release button on the left
appliance side inwards and simultane-
ously remove the lower grill plate from
the appliance.
To remove the upper grill plate,
●
lower it to an angle of approx. 45°
above the lower grill plate. Tilt the
upper grill plate towards you with the
handle (I) so that you can easily reach
the upper release button. Press the
release button inwards and simultane-
ously hold your hand under the upper
grill plate, because it comes loose right
away and falls down. Now, you can
remove the upper grill plate.
To reinstall the grill plates, proceed
●
exactly the other way around: Put the
grill plates into position so that the flat
ends are placed under the brackets on
the back and push the front of the
plates down into the casing. You can
hear a clicking sound when the plates
have locked into place.
Caution: Always make sure that the grill plates are correctly installed and
locked into place before starting to use the appliance
GB
81