Before First Use - SOLIS GRILL & MORE Mode D'emploi

s

BEFORE FIRST USE

Before using your contact grill for the first time, please remove all potential
●
advertisement stickers and labels (except for the type plate).
Set the height slider to the OPEN position and open the grill.
●
Wipe the grill plates with a moist towel and subsequently dry them.
●
Make sure that the grease drip tray is pushed all the way into the appliance base.
●
Make sure that the grill plates are correctly locked into the upper and lower part
GB
●
of the grill (see description on page 81).
Make sure that the temperature control is set to MIN.
●
Place the grill on a stable, even, dry and heat as well as moisture resistant work
●
surface. Make sure that you keep at least 20 cm of space between the appliance
and the next item to the left and right.
Unwrap the power cord completely and plug the power plug into a suitable
●
power outlet.
Switch the appliance on with the ON/OFF button on the appliance back side, the
●
red function light of the button and the red control light next to POWER light up.
Heat the grill up for 5 minutes on the highest temperature.
●
After these 5 minutes, set the temperature control to MIN, switch the appliance
●
off with the ON/OFF button and pull the power plug.
Let the appliance cool down. Wipe the cool grill plates clean with a moist towel
●
and subsequently dry them.
Note: When the appliance heats up for the first time, some smoke might develop.
This is caused by the protection layer on the heating elements and grill plates. This
process is completely harmless and disappears by itself after a short period of time.
The grilling performance is not impaired by this.
80