Unibox RLA vario
1.
General information
The original operating instructions were drafted
in German.
The operating instructions in other languages
have been translated from German.
1.1 Validity of the operating
instructions
These operating instructions are valid for the
flush-mounted box for isolation "Unibox RLA
vario".
1.2 Extent of supply
Please check your delivery for any damage
caused during transit and for completeness.
Items included in the delivery:
• "Unibox RLA vario" with protection cover
• Brackets
• Operating instructions
On delivery, the inside of the "Uni-
box RLA vario" is protected by a
protection cover made of cardboard
(see Illust. 1 on page 17).
Illust. 1: Protection cover on "Unibox RLA
vario"
102272680-V01.04.2020
1.3 Contact
Contact address
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
59939 Olsberg
GERMANY
Technical services
Phone: +49 (0) 29 62 82-234
1.4 Declaration of conformity
Oventrop GmbH & Co. KG hereby declares that
this product complies with the basic require-
ments and other relevant provisions of the EU
Directives concerned.
1.5 Symbols used
Highlights important information
and further explanations.
Action required
f
•
List
1.
Fixed order. Steps 1 to X.
2.
Z
Result of action
2.
Safety-related information
2.1 Correct use
Operating safety is only guaranteed if the prod-
uct is used correctly.
The "Unibox RLA vario" is used in combination
with other installation sets "Unibox" for the
isolation of a surface heating circuit/surface
temperature regulation circuit.
Any other use of the product will be considered
incorrect use.
Claims of any kind against the manufacturer
and/or its authorised representatives due to
damage caused by incorrect use will not be
accepted.
Observance of the operating instructions is part
of compliance with correct use.
General information
17