Publicité
Les langues disponibles
Les langues disponibles
L'HERBE RESTE AU SOL
OU LE BAC DE
RAMASSAGE
NE SE REMPLIT PAS
7. Cleaning and storage
• Clean the motor, wheels, housing and blade of all foreign matter with water.
• Do not clean the machine if the engine and transmission are still hot.
• Do not clean with a high pressure cleaner.
• Do not clean with aggressive liquids. Protect painted surfaces with automobile wax or a
cloth lightly dampened with oil to protect them from rust.
• Before storing, drain the fuel tank
• Keep the device in a dry and safe environment, out of the reach of children.
• Take advantage of a long period of inactivity to have the device completely serviced by
an approved after-sales service.
8. After sales service
For any information or after-sales service, please contact the machine reseller or inquire
on our website: www.eco-repa.com
A machine identification number (serial number) can be found on the identification plate
affixed to the machine as well as on the declaration of conformity.
Be sure to communicate this number to your dealer or repairer in the event of any
intervention on the machine and for any request for spare parts.
Use only original spare parts.
9. Environmental Council
In order to protect the environment, we recommend paying special attention to the following
points:
Always use pure unleaded gasoline.
Always use a funnel and/or a gasoline can with level indication to avoid spills when filling
the fuel tank.
Do not completely fill the fuel tank.
Do not overfill the engine with oil.
Possible cause
Grass too wet.
Clogged ejection port.
Clogged grass catcher.
The blade is dull, damaged.
Insufficient engine power.
Grass collector full.
113
Correction
Allow the grass to dry.
Stop engine, remove obstruction.
Stop the engine, clean the
ventilation slots of the grass
catcher.
Have the blade replaced by an
approved after-sales service.
Mow more often, raise the cutting
height.
Stop the engine, empty the grass
catcher.
Publicité
