GARDEO PRO GTTAC41T144-24 Traduction Des Instructions D'origine page 107

washer - blade bolt.
CAUTION: the blade support can be positioned with a key, be careful to put it back in
place.
TO FIT THE BLADE
Make sure that the sharp side of the blade is oriented in the direction of rotation of the motor.
The manufacturer's brand and spare part code are visible during assembly. Tighten the blade
screw to a torque between 37 Nm to 45 Nm. Tightening is done clockwise.
Using an original replacement blade referenced by the manufacturer, a non-certified and/or
poor quality blade can lead to safety accidents and loss of the manufacturer's warranty.
Grass Bag Cleaning And Replacement
Cleaning
Wash the bag with a garden hose, and allow it to dry completely before use; a wet bag
will clog quickly.
Replacement
Unclip the plastic edges of the bag from the frame and unscrew

The 4 screws and remove the frame from the bag

107