Télécharger Imprimer la page

Makita RBC220 Manuel D'instructions page 18

Masquer les pouces Voir aussi pour RBC220:

Publicité

Les langues disponibles

Les langues disponibles

Caution during operation:
If the throttle lever is opened fully in a no-load operation, the engine ES
rotation is increased to 10,000 rpm or more. Never operate the engine `.
at a higher speed than required and at an fh approximate speed of
6,000 - 8,000 rpm.
:
U Handle
J Handle
Loop Handle
18
E Starting the warm engine
GE
`
: + As described above except without moving the choke le
e Firmly hold the holder case by. your: left. hand: as illustrated.
e Slowly withdraw the starter:grip until resistance is felt and continue
with a smart pull.
e Do not pull out the starter rope to its full extent and do not allow
the starter handle to be retracted without control
ut ensure that
it is retracted slowly.
so
e Repeat the starting operation. until initial ignitions à are > heard.
e Depress the choke lever ( Ad ) and Pull: the. Starter rope again
until the engine starts.
e As soon as the engine starts, immediately tap and release the
throttle, thus releasing the half- throttle lock so that the engine can
run in idle.
e Run the engine for approximately one minute at a moderate speed
before applying full throttle.
;
S
"lever remains in-the down position ( Jo] ).
Stopping
;
?
e Release the throttle lever (6), (7) fully, and when the engine 4 rpm
has lowered, push the stop switch (1), a2) to "STOP! pron.
Engine will stop.
:

Publicité

loading

Ce manuel est également adapté pour:

Rbc250Rbc221Rbc251Rst250