Salicru EMi3 M 5-2 Manuel D'utilisateur page 74

Screen 2.4
With Manual selection, the screen 2.3, supplies voltage to the
motor in clock or counter clock wise in order to increase or de-
crease the voltage by means of «
In three phase equipments with independent phase regulation,
it is used for phase R and in stabilizers with common regulation,
the regulation is applied to the three phases.
Screen 2.5
In three phase equipments with independent phase regulation
and Manual selection in the screen 2.3, it supplies voltage
to the motor of phase S in order to increase or decrease the
output voltage with «
Screen 2.6
In three phase equipments with independent phase regulation
and Manual selection in the screen 2.3, it supplies voltage
to the motor of phase T in order to increase or decrease the
output voltage with «
Screen 2.7
The preventive maintenance timer is reset..
7.3.4. «Alarm» menu.
To access from main screen press three times the upward «
» key. By means of the «
of the submenus, being able to move freely from one to another
with the « » or «
Screen 3.1
It is the gateway to the Alarm menu.
Table 9 shows the different available alarms in a EMi3 stabi-
lizer, they will be displayed in chronological activation order.
Pay attention, if the equipment is single or three phase, be-
cause the number of alarms is higher in the second one be-
cause there more lines.
Keep in mind that some alarms are only available when the
equipment includes the option.
7.3.5. «Parameter selection» menu.
To access from main screen press four times the upward «
key. By means of the «
the submenus, being able to move freely from one to another
with the « » or «
Screen 4.1
It is the gateway to the Parameter menu.
74
» or « » keys respectively.
» or « » keys respectively.
» or « » keys respectively.
» key there is access to any screen
» keys
» key there is access to any screen of
» keys.
Screen alarm
ALARM INPUT
VOLTAGE HIGH
ALARM INPUT
VOLTAGE HIGH R
ALARM INPUT
VOLTAGE HIGH S
ALARM INPUT
VOLTAGE HIGH T
ALARM INPUT
VOLTAGE LOW
ALARM INPUT
VOLTAGE LOW R
ALARM INPUT
VOLTAGE LOW S
ALARM INPUT
VOLTAGE LOW T
ALARM OVERLOAD
ALARM
OVERLOAD R
ALARM
OVERLOAD S
ALARM
OVERLOAD T
ALARM OUTPUT
VOLTAGE HIGH
ALARM OUTPUT
VOLTAGE HIGH R
ALARM OUTPUT
VOLTAGE HIGH S
ALARM OUTPUT
VOLTAGE HIGH T
ALARM OUTPUT
VOLTAGE LOW
ALARM OUTPUT
VOLTAGE LOW R
ALARM OUTPUT
VOLTAGE LOWA S
ALARM OUTPUT
VOLTAGE LOW T
ALARM
FAIL MOTOR
»
ALARM
FAIL MOTOR R
ALARM
FAIL MOTOR S
ALARM
FAIL MOTOR T
Enabling
Description
Input voltage higher than the In single phase
nominal + the high range. equipment.
Phase R input voltage higher
In three phase
than the nominal + the high
equipment
range.
Phase S input voltage higher
In three phase
than the nominal + the high
equipment
range.
Phase T input voltage higher
In three phase
than the nominal + the high
equipment
range
Input voltage lower than nominal In single phase
– the low range. equipment.
Phase R input voltage lower than In three phase
the nominal – the low range. equipment
Phase S input voltage lower than In three phase
the nominal – the low range. equipment
Phase T input voltage lower than In three phase
the nominal – the low range. equipment
Load connected at the output In single phase
higher than 100 %. Single phase equipment
equipment only
In three phase
Load connected at the output of
equipment
phase R higher than 100 %.
In three phase
Load connected at the output of
equipment
phase S higher than 100 %.
In three phase
Load connected at the output of
equipment
phase T higher than 100 %.
Output voltage higher than In single phase
nominal + high accuracy. equipment
Phase R output voltage higher In three phase
than nominal + high accuracy. equipment
Phase S output voltage higher In three phase
than nominal + high accuracy. equipment
Phase T output voltage higher In three phase
than nominal + high accuracy. equipment
Output voltage lower than In single phase
nominal – low accuracy. equipment
Phase R output voltage lower In three phase
than nominal – low accuracy. equipment
Phase S output voltage lower In three phase
than nominal – low accuracy. equipment
Phase T output voltage lower In three phase
than nominal – low accuracy. equipment
The stabilizer is not at the limit In single phase
and it can't stabilize. equipment
The stabilizer is not at the
limit and it can't stabilizer the
In three phase
phase R or the three phases for
equipment
common regulation three phase
equipments.
The stabilizer is not at the limit
and it can't stabilizer the phase In three phase
S in an independent phase equipment
regulation equipment.
The stabilizer is not at the limit
and it can't stabilizer the phase In three phase
T in an independent phase equipment
regulation equipment.
level
+ (3)
+ (3)
+ (3)
+ (3)
SALICRU