Publicité
Les langues disponibles
Les langues disponibles
General index
1. INTRODUCTION.
1.1.
ACKNOWLEDGEMENT LETTER.
2. INFORMATION FOR SAFETY.
2.1.
USING THIS MANUAL.
2.1.1.
Conventions and used symbols.
3. QUALITY AND STANDARD GUARANTEE.
3.1.
DECLARATION OF THE MANAGEMENT.
3.2. STANDARD.
3.3. UKCA PRODUCT MARK AND UK AUTHORIZED
REPRESENTATIVE.
3.4. ENVIRONMENT.
4. PRESENTATION.
4.1.
VIEWS.
4.1.1.
Equipment views.
4.1.2.
Legends corresponding to the equipment views.
4.2. DEFINITION OF THE PRODUCT.
4.2.1.
Nomenclature.
4.3. PRESENTATION.
4.4. DESCRIPTION OF THE EQUIPMENT.
4.5. MAIN QUALITY PERFORMANCES.
4.6. OPERATING PRINCIPLE
4.7.
OPTIONS
4.7.1.
Measurement of output currents, powers and overload.
4.7.2.
Maximum-minimum output voltage protection.
4.7.2.1.
Manual/Automatic operating.
4.7.3.
Bypass Manual.
4.7.4.
Overload contactor.
4.7.5.
Non-critical loads contactor.
4.7.6.
Communication and dry contacts module.
4.7.7.
Budget version of the dry contacts to terminals.
4.7.8.
Slot for SICRES Ethernet communication card.
4.7.9.
Galvanic isolation transformer.
4.7.10. Other regulation ranges.
4.7.11. External manual Bypass panel.
42
5. INSTALLATION.
5.1.
TO CONSIDER IN THE INSTALLATION.
5.2. EQUIPMENT RECEPTION.
5.2.1.
Unpacking, inspection and contents checking.
5.2.2. Storage.
5.2.3. Unpacking.
5.2.4. Transport till its location.
5.2.5. Location.
5.3. CONNECTION.
5.3.1.
Connection of input terminals.
5.3.2. Connection of output terminals.
5.3.3. Non-critical loads connection.
5.3.4. Connection of the protective earth
5.3.5. Connection of the communication module.
5.3.6.
Connection of the budged dry contacts option to terminals.
5.3.7.
SICRES Ethernet communication card.
5.3.8. Connection between an external manual Bypass Panel,
stabilizer and loads.
6. OPERATING.
6.1.
CONTROLS BEFORE COMMISSIONING.
6.2. START UP AND SHUTDOWN OF THE STABILIZER.
6.2.1.
First commissioning procedure.
6.2.1.1.
Procedure
6.2.2. Start up.
6.2.3. Shutdown of the stabilizer.
6.3. BYPASS MANUAL, OPTION.
6.3.1.
Load power supply from mains through the manual Bypass.
6.3.2. Supply the loads through the stabilizer.
6.4. MANUAL BYPASS PANEL, OPTION.
6.4.1.
Supply the loads from mains with the manual Bypass panel.
6.4.2. Supply the loads from the stabilizer.
.
SALICRU
Publicité
