Salicru EMi3 M 5-2 Manuel D'utilisateur page 72

EMi3 x x x x.x KVA
x x x.x V
Screen 0.1

* MEASURES *
Screen 1.1

* OPERATION *
Screen 2.1

* ALARMS *
Screen 3.1

* SELECTION *
* PARAMETERS * 
Screen 4.1

* PASSWORD *
(x x x x) x x x x
Screen 5.1
Fig. 19. Single phase stabilizer screen map.
7.3. DESCRIPTION OF THE SCREENS.
7.3.1. «Start» screen menu.
Screen 0.1
This is the main screen of the system, which is displayed as
soon as the equipment is started. Also, it is the displayed
screen when the (
any of the menus or submenus of the control panel with LCD.
It is shown the stabilizer family, apparent power of the model
and output voltage.
Screen 0.2
This screen shows the serial number of the equipment.
Screen 0.3
This screen shows the software version of the equipment.
7.3.2. «Measures» menu.
To access from main screen press once the upward «
By means of the «
submenus, being able to move freely from one to another with
the « » or « » keys.
72
SERIAL NUMBER

 x x x x x x x x x x 

Screen 0.2
Vout [V]:

x x x.x
 

Screen 1.2
Pout [KW]:
x x x x.x 
(3) Screen 1.6
FREQUENCY
x x.x Hz 
Screen 1.10
SYSTEM

RESTART [x x]
 

Screen 2.2

See the available alarm list las in table 9. They will be displayed in activation chronological order .
 
LANGUAGE

[x x x x x x x x x x] 

Screen 4.2
Vout (±10 %)
x x %

Screen 4.6

) key is pressed in order to escape from
» key there is access to any screen of the
FIRM VERSION

ODY: x x APP: x x 

Screen 0.3
Iout [A]:
 
x x x.x

 
(3) Screen 1.3 (3)
PTotal [KVA/%]:
 
x x x x.x / x x.x 
 
(3) Screen 1.7 (3)
MAN/AUTOM SEL
 
[x x x x x]

 
(7) Screen 2.3 (7)
MODBUS
 
ADD: x x x x x x x Bd 
 
Screen 4.3
OUTPUT ACCURACY
 
x.x % 
 
Screen 4.7
Screen 1.1
Main screen of Measures menu.
Screen 1.2
It shows the output voltage of the equipment. It shows the
three phase voltages for a three phase equipments.
Screen 1.3
It shows the output current of the equipment. It shows the
three phase current for a three phase equipment.
Screen 1.4
It shows the output apparent power of the equipment. It shows
the three phase output apparent power for a three phase equip-
ment.
Screen 1.5
» key. It shows the output load percentage of the equipment. It shows the
three phase output load percentage for a three phase equipment.
Pout [KVA]:

x x x x.x


Screen 1.4 (3)
PF out:

x.x x 

Screen 1.8
MOTOR MANUAL RESET HOURS

[UP / DOWN] MAINT. [NO]


Screen 2.4 (7)
NOMINAL VOLTAGE NOMINAL VOLTAGE

INPUT x x x V OUTPUT x x x V


Screen 4.4
CTRL ANALOG 10V LAUNCH CONFIG.

[YES / NO]  MENU [

Screen 4.8
In section 6.2.1, the screens
are shown in the correlative
displayed way.
Load [%]:

x x x.x


Screen 1.5
Vin [V]:

x x x.x 

Screen 1.9

Screen 2.7



Screen 4.5
] 
Screen 4.9
SALICRU