Salicru EMi3 M 5-2 Manuel D'utilisateur page 68

Manual Bypass panel
Line
Fig. 17. Connection of the stabilizer with a manual Bypass
Panel with double cam switch.
Connections between the Bypass panel and power supply,
•
stabilizer and loads will depend on the type of the cam switch
and protections: single (see Fig. 15), if protections switches
are available (see Fig. 16) or double (see Fig. 17).
The fact oof having or not output switch will have no conse-
quences for the connection.
The manual Bypass Panel will be connected with the power
•
supply, stabilizer and loads, by respecting the phase/s rotation
and neutral N and the protective earth cable stated in the label-
ling of all of them.
In case of discrepancies between the labelling and the instruc-
•
tions of this manual, the labelling will always prevail.
68
EMi3 Stabilizer
To loads
SALICRU