Publicité
Les langues disponibles
Les langues disponibles
2.
Install the seat belt brackets to the outside of the
ROPS mounts
(Figure
Note:
Install the seat belt buckle assembly with
the bent bracket toward the seat.
Figure 10
Right side shown
1. Bolt (3/8 x 1 inch)
2. Seat belt bracket
10).
g316030
3. Locknut (3/8 inch)
3.
Install the right pod bracket to the machine
frame using 2 thread-forming screws (5/16 x 3/4
inch) and the parts removed in
Machine (page 3)
4.
Install the left pod bracket to the machine frame
using 2 thread-forming screws (5/16 x 3/4 inch)
as shown in
Figure
1. Left pod bracket
2. Thread-forming screw
(5/16 x 3/4 inch)
9
1 Preparing the
as shown in
Figure
3.
10.
Figure 11
3. Shoulder bolt
g471592
Publicité
