Velleman CAMCOLD 25 Notice D'emploi page 8

camera has an IR-cut filter that filters the IR light, so it cannot
distort the colour image.
Use this function to control the day/night behaviour of the camera.
Menu: DAY&NIGHT
 AUTO: use this setting for cameras without IR-cut filter, or if
you want to switch the IR-cut filter off during the day. In this
case, the IR light is not filtered during the day, and colours may
be distorted by the IR light.
 IR-CUT: the camera automatically disables the IR-cut filter
during night conditions. During the day, the IR light is filtered
so that the colours are not distorted. During the night, the IR
light is used to generate better images.
White Balance
Use this menu option to define the white balance adjustment. White
balance makes sure that white objects are always reproduced
correctly.
Menu: WB
The following white balance settings are available: AWB-PRO,
AWB-TEMPORAL, AWB-AI, AWB-SZ, AWB-GW, AWB-CCT.
Defining the optimal setting depends on the illumination conditions
of your particular environment. To find the optimal setting, try
each of the settings and select the one that gives the best results.
Zone Masking for Privacy
Use this function to block a part of the image where you don't want
to view activity. For example, if part of the image shows a public
area where recording may be illegal. You can define up to 8 areas.
Menu: ZONE MASKING
COLOR
V. 01 – 17/06/2014
CAMCOLD25
Select a colour for the mask, or select MOSAIC for
a mosaic effect in the masked area.
8 ©Velleman nv