Velleman CAMCOLD 25 Notice D'emploi page 10

AREA NO 0–3
Language
Use this function to set the language of the OSD menu.
8. Technical Specifications
IP rating
pick-up element
number of pixels
resolution
DSP
min. illumination
IR LEDs
max. IR projection distance 15 m
S/N ratio
electronic shutter
lens
V. 01 – 17/06/2014
CAMCOLD25
To define up to 4 areas. Select the desired area
and use the settings below.
 STATUS: select ON to activate the selected
detection area; select OFF to deactivate the
selected detection area.
 COLOR: set the colour of the detection area.
The outer edge of the area will flash in this
colour when the camera detects motion.
 HORIZON SIZE: set the
width [a] (in pixels) of the
detection area.
 VERTICAL SIZE: sets the
height [b] (in pixels) of the
detection area.
 HORIZON MOVE: sets the
distance (in pixels) from
the left side of the screen
[c] for the detection area.
 VERTICAL MOVE: sets the
distance (in pixels) from
the top of the screen [d]
for the detection area.
IP65
1/3" Sony Exmor CMOS image sensor
1305(H) x 1049(V) - PAL
1000 TV lines
FH8520
0.001 lux / F2.0
24
> 52 dB (AGC off)
1/50 to 1/100 000 sec
f3.6mm / F2.0
10 ©Velleman nv