Velleman CAMCOLD 25 Notice D'emploi page 4

 Keep this device away from extreme heat.
 Protect this device from shocks and abuse. Avoid brute force when
operating the device.
 DO NOT use this product to violate privacy laws or perform other
illegal activities.
4. Features
 weatherproof
 with B/W night vision (IR LEDs)
 super high resolution
 vandal-proof housing
 special functions via on-screen display (OSD) set-up menu
o shutter / AGC
o white balance
5. Overview
Refer to the illustrations on page 2 of this manual.
1 mounting plate
2 fixation ring
3 positioning ring
4 lens enclosure (ball)
5 IR night LEDs
6. Hardware installation
Refer to the illustrations on page 2 of this manual.
1. Choose a location for the camera, keeping following guidelines in
mind:
o do not install the camera in locations where extremely high or
low temperatures or excessive vibrations may occur.
o avoid mounting the camera near high electro-magnetic fields.
o do not aim the camera at the sun or other extremely bright
objects or reflections (e.g. metal doors).
2. Hold the mounting plate [1] and unscrew the fixation ring [2] by
turning it counter-clockwise. Note that the lens enclosure [4] and
positioning ring [3] are also released.
3. Use the mounting plate [1] to determine the position of the
mounting holes. Drill the holes.
V. 01 – 17/06/2014
CAMCOLD25
6 lens
7 light sensor
8 cable slot
9 cable
4 ©Velleman nv