Husqvarna 3120XP Manuel D'utilisation page 34

Technical data
Engine
Cylinder displacement, cu.in / cm
Idle speed, rpm
Maximum engine power acc. to ISO 8893, kW/hp @ rpm
1
Ignition system
Spark plug
Electrode gap, inch / mm
Fuel and lubrication system
Fuel tank capacity, US pint / liter
Oil tank capacity, US pint / liter
Type of oil pump
Weight
Weight, lb / kg
Saw chain/guide bar
Type of drive sprocket/number of teeth
Saw chain speed at 133% of maximum engine power
speed, ft/s / m/s.
Recommended cutting equipment
A specific chainsaw model has to be evaluated with the
cutting equipment to be recommended and fulfill the
requirements in ANSI B175.1-2012 (Internal Combustion
Engine-Powered Hand-Held Chainsaws - Safety and
Environmental Requirements) and Canadian Standards
CSA Z62.1-15 (Chainsaws) and CSA Z62.3-11 (R2016)
(Chainsaw kickback).
Chainsaw model Husqvarna 3120XP meet the safety
requirements in ANSI B175.1-2012 and Canadian
1
Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder.
34
Technical data
3
Accessories
Husqvarna 3120XP
7.25 / 118.8
2300 - 2500
6.2 @ 9000
Champion RCJ 7Y / NGK BPMR 7A
0.02 / 0.5
2.64 / 1.25
1.43 / 0.7
Automatic / Manual
22.9 / 10.4
7
287.4 / 26.7
Standards Association CSA Z62.1-15 (Chainsaws) and
CSA Z62.3-11 (R2016) (Chainsaw kickback), when
equipped with the below listed saw chain and guide bar
combination(s).
Note: Other chainsaw models may not meet the
kickback requirements when equipped with the listed
guide bar and saw chain combinations.
We recommend only to use the listed guide bar and saw
chain combinations.
1527 - 001 - 25.06.2020