Publicité
Les langues disponibles
Les langues disponibles
■
Always use the right saw blade for the material
being worked.
■
Use only saw blades with a speed marking
that corresponds to or is higher than the speed
specified for the power tool.
■
Saw blades that are intended for use on wood
or similar materials must comply with EN 847-1.
■
Do not allow the teeth of the saw blade to
overheat.
■
When sawing plastic, avoid melting the plastic.
■
Wear a dust mask when sawing.
■
Only use recommended saw blades.
■
Always wear hearing protection!
Safety information for circular saw
blades
Wear protective gloves!
Wear a dust mask!
Wear protective goggles!
Wear hearing protection!
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries.
Original accessories/auxiliary
equipment
■
Only use the accessories and additional
equipment that are specified in the oper-
ating instructions and compatible with the
appliance.
Before use
Removing/charging/inserting the
battery pack
CAUTION!
►
Always unplug the appliance before you
remove the battery pack
the battery pack to the charger.
│
GB │ IE
■
24
1. To remove the battery pack
2. Insert the battery pack
3. Insert the mains plug into the socket. The control
4. The green charge status indicator LED
5. Insert the battery pack
Checking blade guard functionality
♦
The blade guard
When letting go of the release lever for the blade
guard
original position.
from or connect
NOTE
►
The battery is supplied partially charged.
Before first use, charge the battery in the
charger for at least 1 hour. This guarantees
full battery performance. You can charge the
lithium-ion battery at any time without short-
ening its service life. Interrupting the charging
process does not damage the battery.
►
If the battery overheats during operation, it
cannot be charged immediately. Allow it to
cool down first.
►
Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C.
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The storage climate
should be cool and dry and the ambient tem-
perature should be between 0°C and 50°C.
button
and pull the battery pack
appliance.
charger
.
LED
lights up red.
that the charging process is complete and the
battery pack
is ready.
Pull the release lever for the blade guard
far as it will go.
should move without jamming.
, it should automatically jump back to its
, press the release
out of the
into the high-speed
indicates
back into the appliance.
as
PHKSA 12 A2
Publicité
