Publicité
Les langues disponibles
Les langues disponibles
en-us_main.book.book Page 27 Wednesday, June 12, 2024 1:28 PM
Figure A
Figure B
a
b
NOTE
• If a power level is not selected, the power
settings will turn off after 3 seconds.
Readjusting the Power Level
1
Press the desired cooking zone in the display
to bring up the Power Levels popup.
2
Press the desired level in the Power Levels
popup. If no selection is made, the Power
Levels popup disappears after 3 seconds and
the power level remains the same.
NOTE
• Once the power level is changed, the burner
operation is temporarily stopped and then
restarted at the changed power level.
Power Level Indicator
• Cooking element LED bar
- The range provides an LED bar for each
cooking element on the cooktop. Check the
display and use the LEDs to monitor the power
levels of the elements.
9 Step
a
Boost
b
Melt
c
Simmer
d
• Available power level settings
- The cooktop control's LED bar displays the
element's power level settings, ranging from
Level 1 to Level 9 to Boost.
Turning Off the Cooking Zone
1
After cooking is complete, press the x icon on
the display to turn off the cooking zone.
2
The cooking zone corresponding to the
display will turn off.
3
To turn off all cooking zones, press the
POWER key.
WARNING
• Your cooktop has a residual heat indicator for
each cooking zone. This indicator will warn that
this area has been used and is still giving off
enough heat to cause burns. Avoid touching the
cooking zone when this indicator is shown.
Although the cooktop is off, the popup message
will stay lit until the cooktop has cooled down.
OPERATION
27
1
2
3
4
5
6
7
8
9
Publicité
