Publicité
Les langues disponibles
Les langues disponibles
en-us_main.book.book Page 23 Wednesday, June 12, 2024 1:28 PM
Control Panel
Control Panel Features
Locations of Surface Elements and
Controls
The surface burner elements are positioned in the
same locations on the cooktop and the control
panel for ease of use.
Surface elements and controls
POWER: Press and hold for 1 second to turn
the entire cooktop ON. When it is ON, the
a
cooktop is in standby mode until a cooking
zone is activated.
Pause: Sets the active cooking zone to
minimum output. Press to activate or
b
deactivate.
Clean Lock: Press to lock the control panel
c
before cleaning it.
SETTINGS: Press to adjust settings. For a list
of configurable settings, see "Operating
d
Instructions".
Kitchen Timer: Press to set a kitchen timer.
e
For details, see "Operating Instructions".
Cooktop Control: To check the status of a
cooking zone and adjust the cooking zone.
f
For details, see "Operating Instructions".
To Set the Element Power Level
Select the number on the element power settings
for the active cooking zone to adjust the power
level from 1 to 9.
If you've set 17 power levels in the SETTINGS
menu, press the dots between the numbers to
adjust the power level up or down half a step.
Hot Surface Indicator
Hot surface indicator
• If this icon is displayed on the screen, be careful
because the ceramic glass surface is hot.
- Failure to do so may result in burns or injuries.
• After turning off the burner, the icon is displayed
continuously until the ceramic glass surface
cools down.
- If the temperature near the product is high, it
may take longer for the ceramic glass surface
to cool down.
• Even after the indicator light has turned off, be
careful since the surface may still be hot.
Getting Started
The first time that power is supplied to the
cooktop, the SIGNATURE KITCHEN SUITE and LG
ThinQ Application logos are displayed for 1 second
each in order. After turning on the cooktop for the
first time, adjust the settings to suit your
preferences.
To operate the control panel, press the button
firmly with the flat part of your fingertip.
1
After the startup animation, select the desired
language and press NEXT.
2
Set the correct time of day and choose
between a 12-hour or 24-hour time format.
(The 12-hour format is not available in
French.) Then press NEXT.
3
Read through the application guide in the
display and press DONE.
4
The main screen appears in the display.
OPERATION
23
Publicité
