Publicité
Les langues disponibles
Les langues disponibles
en-us_main.book.book Page 25 Wednesday, June 12, 2024 1:28 PM
Brightness
Adjust the brightness of the LCD display from 20 %
to 100 % in increments of 20 %.
Setting Display Brightness
1
Press SETTINGS at the center bottom of the
main screen, and press Brightness.
2
Adjust the display brightness by pressing and
dragging the dot across the bar, by tapping
anywhere on the bar, or by pressing + or –.
3
Press OK.
Power Levels
1
Press SETTINGS at the center bottom of the
main screen, and press Power Levels.
2
Choose between 17 levels and 9 levels. (The
output of each maximum level is the same.)
3
Press OK.
Language Selection
Set the display language to English, Spanish, or
French.
Selecting a Language
1
Press SETTINGS at the center bottom of the
main screen, and press Language Selection.
2
Select the desired language.
3
Press OK.
Volume
Adjust the volume of the cooktop controls.
Setting the Volume
1
Press SETTINGS at the center bottom of the
main screen, swipe to the second settings
screen, and press Volume.
2
Select MUTE, LOW, or HIGH.
3
Press OK.
Factory Reset
This function returns all settings to the factory
defaults.
1
Press SETTINGS at the center bottom of the
main screen, swipe to the second settings
screen,and press Factory Reset.
2
If you want to reset data to the factory
defaults, press RESET and then OK.
NOTE
• All stored data will be deleted.
Open Source License
This screen contains open source software
licensing information.
1
Press SETTINGS at the center bottom of the
main screen and swipe to the second settings
screen.
2
Press Open Source License.
Before Using the Cooktop
Before using the cooktop for the first time, clean it
thoroughly with the included cleaner or ceramic
cooktop cleaner according to the Care and
Cleaning instructions in this guide. This will help
protect the ceramic surface and make future
cleanup easier.
CAUTION
• Never use abrasive scrubbing pads or cleaners.
They can cause permanent damage to the
cooktop surface.
Activating the Cooktop
To turn on the cooktop, press the POWER key for
approximately 1 second. The LCD panel will turn
on. To turn off the cooktop, press the POWER key.
OPERATION
25
Publicité
