SilverCrest 359940 2101 Instructions D'utilisation Et Consignes De Sécurité page 42

˜ DAB operation
˜ DAB Full Scan
The FULL SCAN will search for the entire DAB
Band III channels . After the scan has finished,
the first alphanumerically found station will be
automatically selected .
button 7 or the DAB/TUNER
Press the
button 21 on the remote control to enter DAB
mode .
Press the MENU button
control, and then press the
/ buttons 27 on the remote control
to select FULL SCAN, and then press the
button 15 or the
remote control to confirm . Or press the
PROG button 10 or the PROG button 44 on
the remote control to start the FULL SCAN .
During the scan, the display will show
SCAN##% .
Once the scan has finished, the pro will show
the total number of the station, and then
broadcast the first found station .
˜ Manually Tuning In DAB
Radio Stations
As well as the auto scan function, you can
manually tune them in . You will need to know
which multiplex the station you are looking for is
in .
Press the MENU button
control then press the
the remote control to select MANUAL, and
then press the button 15 or the
42 on the remote control to confirm .
Press the /
contyrol to select DAB stations from 5A to
13F .
Press the button 15 or the
on the remote control to confirm .
During the scan, the display will show
SCAN##% . The product will store the station
automatically .
Once the scan has finished, press the
buttons 27 on the remote control to select your
desired station .
40 GB/IE
on the remote
30
button 42 on the
on the remote
30
/ buttons 27 on
button
buttons 27 on the remote
button 42
/
˜ DRC Setting
You can set the DRC (Dynamic Range
Compression) to High, Low or Off . This will reduce
the volume of loud sounds and increase the
volume of quiet sounds .
Press the MENU button
control then press the
on the remote control to select DRC, and then
press the button 15 or the
on the remote control to confirm .
Press the /
control to select HIGH / LOW / OFF, and
then press the button 15 or the
42 on the remote control to confirm .
˜ Saving Preset Stations
You can store up to 30 of your favorite stations to
the memory . This will enable you to access your
favorite stations quickly and easily .
To store a preset, you must first be listening to
the station that you would like to save .
Press the PROG button 44 on the remote
control . The display will show "## Empty",
and the preset number will flash .
Press the / buttons 27 on the remote
control to select your desired station preset
number .
Press the PROG button 44 on the remote
control to confirm your station, the display will
show "STORED" .
˜ Recalling a Preset Station
Once you have saved a station to one of the
preset numbers, you can recall it by pressing
the the / 27 on the remote control to
select your desired preset number .
Preset number and station name will show on
the display to indicate the preset station you
are listening to .
If the number of the stored station is known,
you can enter the two digits via the numeric
keys 0-9 31 on remote control to call up the
desired station directly .
NOTE: The numeric keys 0-9 31 can only be
used after saving the preset stations .
on the remote
30
/ buttons 27
button 42
buttons 27 on the remote
button