Publicité
Les langues disponibles
Les langues disponibles
NOTE: While the DAB mode is selected, the
clock will be set automatically .
Time display during operation
Press the CLOCK button 32 on the remote control
to show the current time on the display for a few
seconds .
˜ Set the alarm timer
NOTE: The clock must be correctly set for the
timer to operate correctly .
In STANDBY mode, press and hold the
TIMER button 38 on the remote control until
the hour digits flash on the display .
Press the
/
buttons 27 on the remote
control to adjust the hour digits .
Press the TIMER button 38 on the remote
control to confirm . The minute digits will flash
on the display .
Press the
/
buttons 27 on the remote
control to adjust the minute digits .
Press the TIMER button 38 on the remote
control to confirm . BUZZER will flash on the
display .
Press the
/
buttons 27 on the remote
control to select from on of the following
modes: FM / DAB / CD / USB / BUZZ
Press the TIMER button 38 on the remote
control to confirm . The display will show the
volume level .
Press the
/
buttons 27 on the remote
control to adjust the volume .
Press TIMER 38 on the remote control to
confirm .
Short press
Description
TIMER 38
1x
Timer on
2x
Timer off
NOTE: The operating time to set each step
must not take longer than 20 seconds or it will
return to time display .
If CD or USB alarm type was selected but the
corresponding media is not present, the alarm
clock will automatically starts with the buzzer .
Stop alarm ring
When the alarm rings, press any button, except
the VOL+ / VOL– control 2 . The alarm stops
but the alarm settings remain .
˜ Set the sleep timer
This product can switch to standby automatically
after a set period of time .
Press the SLEEP button 25 on the remote
control repeatedly to select your desired
number of minutes . The number of minutes
shown will display in this sequence:
SLEEP 15 – SLEEP 30 – SLEEP 60 –
SLEEP 90 – SLEEP 00
The product is now set to turn off after the
number of minutes you have set . The display
will show SLEEP # (Example: SLEEP 15
means the product will switch itself off after
15 minutes . SLEEP 30 means the product will
switch itself off after 30 minutes) .
To view the remaining time before switch off
press the SLEEP button 25 on the remote
control .
To cancel the sleep timer press the
SLEEP button 25 on the remote control
repeatedly until SLEEP 00 is shown on the
display .
˜ CD / USB operation
˜ About discs
Display
Handling
–
Do not touch the playback side of discs .
Hold discs by the edges to avoid leaving
fingerprints on the surface .
Any dust, fingerprints or scratches may cause
a malfunction .
Never attach a label or sticky tape to the disc .
GB/IE
35
Publicité
