Publicité
Les langues disponibles
Les langues disponibles
The first programmed radio station is played
automatically .
˜ Tune to a preset radio station
Press the ALBUM / PRESET
27 on the remote control to select the desired
preset number .
˜ Tuning in a station
Press and hold the
buttons 14 or the
buttons 27 on the remote control . T he
frequency changes down or up automatically
until a station is found .
Press the
/
remote control or the
repeatedly until you find the desired station .
If reception is poor, try to adjust the position of
the FM aerial 48 or try to move the product to
another location .
Briefly press the or the
14 or the
/
remote control to change the frquency in 0,05
MHz steps .
˜ Presetting stations manually
You can preset up to 30 FM stations .
Tune in the desired station . Press the
PROG button 44 on the remote control to
confirm .
Press the ALBUM / PRESET
buttons 27 on the remote control to select the
preset number .
Press the PROG button 44 on the remote
control to confirm .
Repeat above steps for each station you want
to store in the memory with a preset number .
˜ For better reception
Fully unwind the FM aerial 48 . Place FM
aerial 48 in a position that offers the best
reception quality .
Press the ST / MONO button 22 on the
remote control to toggle between stereo and
mono mode . This is helpful when receiving
poor signal reception .
/
buttons
/
/
buttons 27 on the
/
buttons 14
/
buttons
buttons 27 on the
/
˜ Scan Setting
In the menu you can choose if you want
your radio to tune to Strong Stations Only or
select All Stations, and it will try to tune to all
stations, however some may be very weak .
In FM mode, press the MENU button
the remote control to display the FM menu .
Press the
/
remote control to select SCAN and then press
the
button
to confirm .
15
Press the
/
the remote control to select between
STRONG and WEAK, and then press the
button 15 or the
remote control to confirm .
˜ Audio Setting
If you find that the station you are listening
to is not clear, you can select to listen to it in
MONO this can often clear up some of the
static .
In FM mode, press the MENU button
the remote control to display the FM menu .
Press the
/
27 on the remote control to select AUDIO and
then press the
button 15 or the
42 on the remote control to confirm .
Press the
/
control to select between STEREO and
MONO, and then press the
confirm .
˜ Showing RDS information
If you tune to a RDS station, press the
INFO button 26 on the remote control
repeatedly to scroll through the following
information: Station Text / Station Name /
Frequency / STEREO or MONO / Program
Type / RDS Clock / RDS Date .
on
30
buttons 27 on the
buttons 27 on
button 42 on the
on
30
buttons
button
buttons 27 on the remote
button
15
GB/IE
39
to
Publicité
