SilverCrest 359940 2101 Instructions D'utilisation Et Consignes De Sécurité page 40

Any obstacle between this product and a
Bluetooth device can reduce the operational
range .
If the signal strength is too weak, the
connection between your Bluetooth playback
device and the product can be disconnected .
The product will then automatically switch
back to pairing mode .
button 7 or the BT button 21
Press the
on the remote control to select BT (Bluetooth)
mode . NO BT will show on the display if the
product is not paired to any Bluetooth device .
Activate your Bluetooth device and select the
search mode . SBMS D30 B1 will appear
on your Bluetooth device . If you cannot
find the product, press the PAIR button 34
on the remote controlor press and hold the
button 15 or the
remote control . The product enters pairing
mode . The display shows PAIRING .
Select SBMS D30 B1 in the pairing list . After
successful pairing: The display shows BT and
the product emits acoustic signals .
Play music from the connected device .
To disconnect the Bluetooth function,
you can:
Switch to another function on the product;
Disable the function from your Bluetooth
device . The Bluetooth device will be
disconnected from the product .
Press and hold the
button 34 on the remote control .
The Bluetooth device will be disconnected
from the product .
NOTES:
Enter 0000 for the password if necessary .
If a connection exists, press the
PAIR button 34 on the remote control or
press and hold the
the pairing mode . The connection will be
interrupted . The display shows PAIRING .
If no other Bluetooth device pairs with the
product within 2 minutes, the product recovers
its previous connection .
The product also disconnects when your
device is moved beyond the operational
range .
38 GB/IE
button 42 on the
button 42 or the PAIR
button 42 to re-activate
If you want to reconnect your device to the
product, place it within the operational range .
If the device is moved beyond the operational
range, when it is brought back, check if the
device is still connected to the product .
When devices are connected, BT is shown on
the display .
If the connection is lost, the display shows NO
BT . Follow the instructions of this chapter to
pair your device to the product again .
˜ Listen to music from
Bluetooth device
If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP),
you can listen to the music stored on the device
through the product .
If the device also supports Audio Video Remote
Control Profile (AVRCP), you can use the product's
remote control to play music stored on the device .
Pair your device with the product .
Play music via your device (if it supports
A2DP) .
Use the supplied remote control to control play
(if your device supports AVRCP) .
Button Description
15 Press button to play .
Press button to pause playback .
42
Press button to resume playback
29 Press button to skip to the
/
previous / next track .
/
14
˜ FM operation
˜ Auto scan and save preset
stations
Fully unwind the FM aerial 48 . Place it in the
position that offers the best reception .
Press the button 7 or the
TUNER button 21 on the remote control to
select the FM mode .
Press and hold the PROG button 10 or the
PROG button 44 on the remote control to
activate automatic programming . All available
stations are programmed in an ascending
frequency sequence .