Special Functions - Tenovis CS 578 Notice D'utilisation

Special functions

Your telephone has two special functions which you can use on other telephone
systems if you wish providing your network provider and your PABX support them.
Please consult your public network provider and the operating manual of your
PABX.
– Connected line identification presentation CLIP: Your network provider transfers
the caller's number into the analog network in a suitable form. Your PABX passes
this information on to the analog terminal of the CS578.
– Charge management Your network provider sends a 16 kHz charge pulse (may
have to be applied for separately). Your PABX passes this information on to the
analog terminal of the CS578. Charge management then takes place under
4 menu items:
Determine costs
of one charge unit
Notes:
Display total
charges / units
Display charges /
units for
individual mobile
units
Reset the charge
meter
Notes:
Scroll to menu item 22
"Fix charges"
S If units rather than charges are to be displayed, you must enter
the amount 0.00.
21 1–3––– 24,36 / 000203
Scroll to menu
item 21 "Display
charges"
1 6
. . .
Enter the internal
number of the mo-
bile unit after the
total display
Scroll to menu item 21
"Display charges"
S The displayed unit or charge total is not binding.
It may differ from those on the telephone bill for technical
reasons.
C
Clear old setting
if necessary
Display of the logged on mobile units
(e.g. 1 and 3) and total charges or units
for all mobile units (if no costs have been
fixed for one charge unit).
21 1–3––– 24,36
The selected mobile
unit number flashes,
the charges/units are
displayed on the right
C
Press until the acknowledgement
tone sounds. All charge and unit
totals are now reset to zero.
9
1
. . .
Enter amount for
one unit
0
Return to total
display for all
mobile units:
Press the "0" key
47