Changing Mobile Unit Settings - Tenovis CS 578 Notice D'utilisation

Changing mobile unit settings

Handset volume
Setting the bell
volume of the
mobile unit
Setting the melody
of the bell on the
mobile unit
Switching key tone
on and off
Switching
Quicktalk
on and off
Notes:
Setting mobile
unit settings to
their initial state
(Reset)
Notes:
40
Scroll to menu item A2
"Volume"
Scroll to menu item
11 "Bell volume"
Scroll to menu
item 12 "Melody"
Scroll to menu Switch key tone off (= 0)
item 13 "Key tone" or on (= 1)
Scroll to menu off (= 0), always on (= 1)
item 14 or only on for incoming
"Quicktalk" calls (=2)
S Quicktalk 1: If the mobile unit is removed from the base station
"the handset is lifted" automatically.
S Quicktalk 2: When the mobile unit rings"the handset is lifted"
when the mobile unit is removed from the base station.
Scroll to menu item 20 "Reset"
S All individual settings and phone numbers are cleared from the
repeat dialling memory when resetting.
1 3
. . .
Setting the volume:
1 = quiet / 3 = loud
1 3
. . .
Set the volume:
1 = quiet / 3 = loud
1 9
. . .
Select bell
melody
0 1
or
0 2
. . .
C
Press the "Clear" key
Save the
setting
Save the
setting
Save the
setting
Save the
setting
Save the
setting