Bull NovaScale R460 F2 Guide De Mise En Route page 10

Installing the Optional Bezel
Install the bezel (optional).
Operating System Installation
The NovaScale R460 F2 offers an embedded Configuration utility: the Unified
Server Configurator - Lifecycle Controller Enabled (USC-LCE), which includes
an OS Deployment Wizard that assists you with the installation of the Operating
System.
Refer to the technical characteristics of the server on
http://www.bull.com/novascale
NOTE:
The list of operating systems offered by the USC may be larger than the
list of the supported Operating Systems.
NOTE:
for the installation of a supported Operating System not listed in the USC,
see http://support.bull.com.
Residing on an embedded flash memory card, USC-LCE is similar to a BIOS
utility in that it can be started during the boot sequence and can function
independently of an installed operating system.
USC-LCE provides drivers that may be required for operating system
installation, depending on which operating system you are installing. The OS
Deployment wizard extracts these drivers and copies them to a staging directory.
These files are deleted after an 18-hour period or when you press the <F10> key
to either cancel operating system installation or re-enter USC after rebooting.
4
Getting Started With Your System
to get the list of supported operating systems.