Sammic CF-5 Mode D'emploi page 3

This user manual explains how to install and
maintain the CF-5 hand-operated potato-chip-
ping machine.
This machine has been designed and manu-
factured according to the European Machinery
Directive 98/37/EEC.
SETTING UP
1. Fix the feet with bolts.
2. Lift the lever to the highest position.
3. With the lever in that position, set one end
of the spring in the upper pin and stretch the
spring downward until it fits into the lower pin.
4. Repeat step 3 with the other spring.
5. When you have finished fitting both springs,
the machine is ready to work.
CLEANING
For optimum cleaning of your CF-5 hand-opera-
ted potato chipper, remove the grid and pusher.
To do so, undo the fixing screws.
Clean all the parts that have been in contact
with food with hot water and food-compatible
detergent immediately after use. Then, rinse
with plenty of hot water and disinfect with a soft
cloth impregnated with ethyl alcohol (90º).
The grid cutters are sharp. Handle them with
care when washing them.
MOUNTING THE GRID-PUSHER SET
1. Machine without grid and pusher
3 3
- 3 -
Users Manual
2. Set the grid in the lower housing and fix it with
washers and screws.
3. Put the pusher on the grid.
4. Lower the lever and with the lever completely
down, secure the pusher to the body with
screws.
5. Lift the lever.
OPTIONAL ATT ACHMENTS
The CF-5 hand-operated potato chipper can be
fitted with grid-pusher sets in the following sizes:
- 8x8 mm
- 10x10 mm
- 12x12 mm
EN