SilverCrest SHBS 3.7 C2 Mode D'emploi page 49

7. Cleaning and care
DANGER! Risk of electric shock!
Unplug the power unit 10 from the wall socket before clean-
ing the hair and beard trimmer 5 and the battery charg-
er 11.
WARNING! Risk of injury!
Always switch the hair and beard trimmer 5 off before
cleaning.
WARNING! Risk of material damage!
Do not use any astringent or abrasive cleaning agents.
NOTE: clean and oil the device after every use.
Hair and beard trimmer
• Wipe the casing of the hair and beard trimmer and the bat-
tery charger with a damp cloth.
Comb attachments
• Remove the comb attachment. Rinse the comb attachment
with water and let it dry before using it again.
Hair trimmer, beard trimmer and precision trim-
mer attachments
1. Figure A: remove the attachment from the hair and beard
trimmer 5 by pressing it with the thumb towards the rear.
2. Remove the hair remnants from the attachment using the
cleaning brush 17 included in the delivery.
3. Apply a few drops of blade oil 16 to the cutting edge of the
attachment. Using a soft cloth, wipe off the surplus oil, if neces-
sary. Only use acid-free oil, such as e.g. sewing machine oil.
and battery charger
5
,
2 1
, ,
13 14 4
11
47
GB