Nice S4BAR Instructions Et Avertissements Pour L'installation Et L'utilisation page 3

ENGLISH
Instructions translated from Italian
Contents
Chapter 1 - GENERAL WARNINGS: SAFETY - INSTALLATION - USE . 1
Chapter 2 - PRODUCT DESCRIPTION AND INTENDED USE . . . . . . . . 3
Chapter 3 - INSTALLATION
3 .1 - Preliminary checks for installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3 .2 - Product application limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3 .2 .1 - Product durability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3 .3 - Typical system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3 .3 .1 - Modifying the factory settings of the Closure manoeuvre . . . . . . . . 4
3.4 - Barrier fixture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.4.1 - If the support surface already exists . . . . . . . . . . . . . . . . . . . . . . . . 4
3.4.2 - If the support surface does not exist . . . . . . . . . . . . . . . . . . . . . . . 4
3 .5 - Pole installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 .5 .1 - Pole support assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 .5 .2 - Pole assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 .6 - Manually releasing and locking the gearmotor . . . . . . . . . . . . . . . . . . . 4
3 .7 - Mechanical stop adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 .8 - Pole balancing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Chapter 4 - ELECTRICAL CONNECTIONS
4 .1 - Description of the electrical connections . . . . . . . . . . . . . . . . . . . . . . . . 5
4 .2 - Initial start-up and connection check . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4 .3 - Pre-set functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4 .4 - Recognition of the connected devices . . . . . . . . . . . . . . . . . . . . . . . . . 5
4 .5 - Recognition of limit positions on opening and closing . . . . . . . . . . . . . . 5
4 .6 - Pole movement check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4 .7 - Connecting a radio receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4 .8 - Connecting the pole lights (optional accessory) . . . . . . . . . . . . . . . . . . 6
4.9 - Connecting the LED flashing light mod. XBA7 or traffic light to
LED mod. XBA8 (optional accessories) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4 .10 - Connection of other devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4 .10 .1 - Programming unit Oview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4 .10 .2 - Buffer battery mod . PS124 (accessory) . . . . . . . . . . . . . . . . . . . . 6
4 .10 .3 - Solemyo System (photovoltaic supply) . . . . . . . . . . . . . . . . . . . . . 6
Chapter 5 - TESTING AND COMMISSIONING
5 .1 - Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5 .2 - Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Chapter 6 - CONTROL UNIT PROGRAMMING
6 .1 - Level one programming (ON-OFF functions) . . . . . . . . . . . . . . . . . . . . . 7
6 .2 - Level two programming (adjustable parameters) . . . . . . . . . . . . . . . . . . 8
Chapter 7 - TROUBLESHOOTING... (troubleshooting guide) . . . . . . . .10
Chapter 8 - FURTHER INFORMATION
8 .1 - Total deletion of control unit memory . . . . . . . . . . . . . . . . . . . . . . . . . 11
8 .2 - Other functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
8 .3 - Adding or removing devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8 .3 .1 - Bluebus Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8 .3 .2 - Photocells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8.3.3 - MOTB digital selector and proximity reader for MOMB
transponder cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
8 .3 .4 - STOP Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
8 .4 - Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
8 .4 .1 - Signals of control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
8 .4 .2 - Flashing light signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PRODUCT DISPOSAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
TECHNICAL CHARACTERISTICS OF THE PRODUCT . . . . . . . . . . . . . 15
Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Operation manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Maintenance schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
PICTURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I - XIV
The following warnings are taken directly from the Regulations and
apply, as far as possible, to the product described herein.
1
GENERAL WARNINGS:
SAFETY - INSTALLATION - USE
1.1 - Safety instructions
CAUTION Important safety instructions. Follow all instructions as im-
proper installation may cause serious damage
CAUTION Important safety instructions. It is important for you to com-
ply with these instructions for your own and other people's
safety. Keep these instructions
• Before commencing the installation, check the "Product technical specifi-
cations", in particular whether this product is suitable for automating your
guided part . If it is not suitable, DO NOT continue with the installation .
• The product cannot be used before it has been commissioned as specified in
the chapter on "Testing and commissioning"
CAUTION According to the most recent European legislation, the im-
plementation of an automation system must comply with the
harmonised standards provided by the Machinery Directive
in force, which enables declaration of the presumed con-
formity of the automation. Taking this into account, all opera-
tions regarding connection to the electricity grid, as well as
product testing, commissioning and maintenance, must be
performed exclusively by a qualified and skilled technician!
• Before proceeding with the installation of the product, check that all materials
are in good working order and suited to the intended applications
• The product is not intended for use by persons (including children) with
reduced physical, sensory or mental capacities, nor by anyone with insuf-
ficient experience or familiarity.
• Children must not play with the appliance
• Do not allow children to play with the fixed control devices of the product.
Keep the remote controls out of reach of children .
CAUTION In order to avoid any danger from inadvertent resetting of the ther-
mal cut-off device, this appliance must not be powered through
an external switching device, such as a timer, or connected to a
supply that is regularly powered or switched off by the circuit
• Provide a disconnection device (not supplied) in the plant's mains power sup-
ply, with a contact opening distance that permits complete disconnection
under the conditions dictated by overvoltage category III
• Handle the product with care during installation, taking care to avoid crush-
ing, denting or dropping it, or allowing contact with liquids of any kind . Keep
the product away from sources of heat and naked flames. Failure to ob-
serve the above can damage the product, and increase the risk of danger or
malfunction . If this should happen, stop installation immediately and contact
Customer Service
• The manufacturer assumes no liability for damage to property, items or per-
sons resulting from non-compliance with the assembly instructions . In such
cases the warranty for material defects is excluded
• The weighted sound pressure level of the emission A is lower than 70 dB(A)
• Cleaning and maintenance to be carried out by the user must not be carried
out by unsupervised children
• Before working on the system (maintenance, cleaning), always disconnect
the product from the mains power supply
• Check the system periodically, in particular all cables, springs and supports to
detect possible imbalances, signs of wear or damage . Do not use, if repairs
or adjustments are necessary, since installation failure or an incorrectly bal-
anced automation may cause injury
• The packing materials of the product must be disposed of in compliance with
local regulations
• When operating a biased-off switch, make sure that other persons are kept
away from the automation .
• When performing an operation, keep an eye on the automated mechanism
and keep all bystanders at a safe distance until the movement has been
completed
• Do not operate the automation if anyone is working on it; disconnect its pow-
er supply before permitting such work to be done
• If the power cable is damaged, it must be replaced by the manufacturer or
the latter's technical assistance service, or by a similarly qualified person, in
order to prevent any type of risk
1.2 - Installation warnings
• Prior to installing the drive motor, check that all mechanical components
are in good working order and properly balanced, and that the automation
moves correctly
• Make sure that the controls are at a safe distance from the moving parts,
while allowing a good view of them .
Unless a switch is used, the controls should be installed at least 1 .5m off the
ground and should not be accessible
• If the opening movement is controlled by a fire system, make sure that any
windows larger than 200 mm are closed by the controls
• Make sure that nothing can be trapped between the moving and fixed parts
during manoeuvres
• Permanently affix the manual operation label next to the manual control
• After installing the drive motor, make sure that the mechanism, protective
system and all manual manoeuvres operate properly
English – 1