Metabo HPT NR 1890DC Manuel D'instructions Et De Sécurité page 27

CLEARING A JAM
If nails are jammed in fi ring head, remove it, and adjust the
nailing in the following order.
CAUTION
● Remove the battery from the Nailer.
Remove the battery from the Nailer.
Remove all nails.
Remove the M5 bolts with wrench.
Pull magazine away from the fi ring head, and clear
jam.
CAUTION
● NEVER hit the driver blade.
● NEVER point the tool at yourself or another
person, to avoid risk of injury by mis-fi ring.
Even if the battery is removed from the nailer,
there is still energy of compressed air remaining
inside.
Do not loosen
these screws
Attach the magazine to the injector and tighten with
the M5 bolt.
NOTE
● In case of frequent jam, contact a metabo HPT
authorized service center.
English
27