Parkside 444561 2307 Consignes D'utilisation Et De Sécurité / Traduction Du Mode D'emploi D'origine page 8

1 Explanation of the symbols on the product
Symbols are used in this manual to draw your attention to potential hazards. The safety symbols and the accompany-
ing explanations must be fully understood. The warnings themselves will not rectify a hazard and cannot replace prop-
er accident prevention measures.
Before commissioning, read and observe the operating manual and safety instructions!
Wear hearing protection.
If dust builds up, wear respiratory protection!
Wear safety goggles.
Attention! Danger of injury! Do not reach into saw blade while it is running!
Attention! Laser beam (Fig. 1, 20)
Protection class II (double insulation)
The product complies with the applicable European directives.
2 | GB / IE / NI / CY / MT