Publicité
Les langues disponibles
Les langues disponibles
3.
If the door seal is damaged, a lot of heat will be generated around the door. Do not scrub or
remove the seal. Never operate the appliance if the seal is damaged or missing.
Danger of serious damage to health!
The appliance becomes very hot during pyrolysis. The coating on baking trays and tins is destroyed
and harmful gases are released. Never clean baking trays and tins in "Pyrolysis" mode. Never use
pyrolysis to clean accessories.
Setting pyrolytic self-cleaning
1. Switch on the oven by pressing the
2. Select the "pyrolytic self-cleaning" mode by pressing the
When the display changes to
3. Check that you have removed all accessories and food and close the door.
4. Press the "Start/Pause" button
Ventilate the kitchen when the cleaning is running.
The door will lock shortly after starting. It can only be opened when the temperature has fallen to a
relatively safe level.
When self-cleaning is finished
A continuous acoustic signal will sound and the oven will stop heating. This means that the pyrolytic
self-cleaning process is finished. You can press the
also switch off automatically later. If you want to start any operating mode afterwards, you must
keep the
button pressed for 3 seconds, as the control panel of the oven is locked for safety
reasons during pyrolytic self-cleaning.
Pausing and cancelling pyrolytic self-cleaning
As soon as the self-cleaning function is started, the oven automatically locks the function. If you want
to pause or cancel the operating mode, you must first unlock the control panel. Press and hold the
button for 3 seconds to unlock the function. Then press the
operating mode. Pressing once means "Pause" and pressing twice means "Stop". The door can only
be opened when the temperature is low enough and the door lock is opened.
button.
, pyrolytic self-cleaning has been switched on.
to start the self-cleaning process.
20
button.
button to turn off the signal. However, it will
button to pause or cancel the
Publicité
