Installing Ssds; Installing The Power Supply; Installing Pci-E/Pci Card(S); Removing The Front Fascia - Corsair CARBIDE Série Guide D'installation

CARBIDE SERIES
®

4. Installing SSDs

Slide the 2.5" drive into the
tray until it snaps into place.

5. Installing the Power Supply

Install the PSU into the
lower chamber of the case,
and secure with four screws
from behind.
11
400

6. Installing PCI-E/PCI Card(s)

1. Remove thumbscrews and
corresponding slot covers.
2. Install the expansion
card and secure with
thumbscrews.
2

7. Removing the Front Fascia

Grasp the front panel from
underneath, then gently but
firmly pull away from the chassis.
400C_400Q STEP 6
400C_400Q STEP 6
1
12