Installing Hdds; Installing Ssds; Installing Pci-E/Pci Card(S) - Corsair CARBIDE Série Guide D'installation

CARBIDE SERIES
®

4. Installing HDDs

Step 1 – Place the drive into
the 3.5" drive tray.
600C_600Q Step 5
Step 2 – Slide the drive
and rail assembly into the
HDD cage from behind the
motherboard as shown.
600C_600Q STEP4

5. Installing SSDs

1. Remove the screws to
release the drive tray
from the back of the
motherboard tray.
2. Slide the 2.5" drive into
the tray until it snaps
into place.
3. Reattach the drive tray
to the back of the
motherboard tray.
11
600
Step 2
600C_600Q STEP4
1
2
6. Installing the Power Supply
Remove the thumbscrews
securing the power supply
mounting bracket to the back
of the case.
Attach bracket to the power
supply with screws (included
Step 1
with the power supply).
Slide power supply into the
back of the case.
Replace thumbscrews,
securing the bracket to the
case.
Note: PSU should be installed with
the fan facing down to ensure
proper airflow.

7. Installing PCI-E/PCI Card(s)

1. Remove the thumbscrews
and the corresponding
slot covers.
2. Install the expansion
card and secure with a
thumbscrew.
600C_600Q STEP6
3
12