Publicité
Les langues disponibles
Les langues disponibles
•
After removing the suction
hose (15), clean the dust and soot
particles from the connections. This
ensures that the suction hose (15) can
be inserted again easily.
•
Clean the folded filter (18)
(see "Cleaning the folded filter").
Cleaning the folded filter
B
Replace the pleated filter (
if it is worn, damaged or heavily
soiled (see "Spare Parts/Accesso-
ries").
1. Take off the container cover (10).
2. Rotate the folded filter (18) in an anti-
clockwise direction and remove it.
3. Tap out the pleated filter (18) and clean
it with a paintbrush or hand brush.
Don't wash the pleated filter
(18) in water.
4. Place the folded filter (18) on the inver-
ted container cover (10).
5. Screw in the folded filter (18) tightly in
a clockwise direction.
The folded filter (18)
must rest on the con-
tainer cover(10) and
press the safety
switch (19) down-
wards.
The arrow on the
folded filter (18)
must be at the same
height as the arrow on the label of the
container cover (10).
18)
19
Storage
•
To store, wind the power cord (1)
around the retaining bracket (6) on the
container lid (10).
•
Keep the equipment in a dry place, out
of reach of children.
For space-saving storage of the ash vacu-
um, you can for example:
•
place the other end of the hose on the
holder (2);
•
fit the suction pipe (16) and the crevice
nozzle (17) onto one of the three roll-
ers with an attachment port (14).
Disposal/Environmental
protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Machines must not be disposed of
with household refuse.
Take the machine to a recycling point. The
waste plastic and metal parts can be sepa-
rated, accurately graded and passed on
for recycling. Contact our Service Centre
for more details.
Defective units returned to us will be dis-
posed of for free.
GB
IE
23
Publicité
