Parkside PAS 1200 E4 Traduction Des Instructions D'origine page 21

Folded filter assembly
The metal folded filter (18) is alrea-
dy pre-assembled before initial use.
1. Place the folded filter (18) on the inver-
ted container cover (10).
2. Screw in the folded filter (18) tightly in
a clockwise direction.
The folded filter (18)
must rest on the
container cover (10).
Then press down the
switch of the safety
switch (19).
The arrow on the fol-
ded filter (18) must
be at the same height as the arrow on
the label of the container cover (10).
If the safety switch (19) is not
pressed down, the appliance can-
not be started.
If the folded filter (18) is rotated
further, as the arrow mark on the label
indicates, the folded filter can firmly
suction to the container cover (10).
3. Place the container cover (10)
C
on the metal container (13) and
lock it with the locking clips (9).
When fitting the container cover
(10), you must ensure that the on/off
switch (8) and the hose connection
(11) are roughly aligned to each
other or the container cover cannot
be put on correctly.
19
C
Suction hose assembly
1. Connect the suction hose (15).
To do this, insert the rotatable plastic end
piece with the printed symbol
into the hose connection (11) and screw
it on clockwise (bayonet connection).
When assembling/detaching the
suction hose (15), hold the black
plastic end piece and not the suc-
tion hose (15). Twisting or bending
could damage the hose.
Suction tube:
Plug the suction tube (16) onto the rigid
end piece of the suction hose (15).
Crevice nozzle:
Place the crevice nozzle (17) on the rigid
end piece of the suction hose (15).
Suction tube and crevice nozzle:
Place the crevice nozzle (17) on the suc-
tion tube (16) and place this on the rigid
end piece of the suction hose (15).
Switching on/off
Connect the mains plug.
The appliance is equipped with a
safety switch (
operation only if the folded
filter ( 18) is fitted correctly.
Switching On:
On/Off Switch (see
Switching Off:
On/Off Switch (see
GB IE
19) that permits
8) In position "I"
8) In position "0"
21