General description
See the front fold-out page for
illustrations.
Delivery Contents
Unpack the equipment and check that it is
complete. Dispose of the packaging mate-
rial in a proper manner.
- Container lid incl. motor housing
- Metal container
- Suction hose
- Suction tube
- Crevice nozzle
- Pleated filter
- Instruction Manual
Description of operation
The ash vacuum cleaner is provided with a
stable metal container with cover and reels.
The suction equipment consists of a flexible
suction hose, an aluminium suction tube and
an attachment for crevice cleaning.
A safety switch prevents the appliance
from being operated without the filter.
A thermal fuse disconnects the power
circuit in the event of overheating or fire
inside the device.
The following describes the function of the
operating parts.
Overview
1 Power cord
A
2 Holder for suction tube/suction
hose
3 Filter cleaning switch
4 Suction tube holder
5 Carry handle
6 Power cord holder
7 Viewing window filling level
indicator
8 On/off switch
9 Seal clips
10 Container lid
11 Hose connection
12 Arched handle for metal con-
tainer
13 Metal container
14 Reels with attachment port
15 Suction hose
16 Suction tube
17 Crevice nozzle
18 Pleated filter
B
19 Safety switch
Technical data
Ash vacuum cleaner ... PAS 1200 E4
Mains voltage ..... 220-240 V~, 50/60 Hz
Rated power input
(Power consumption) .................. 1200 W
Power cord length ......................... 5.0 m
Safety class ......................................
Protection category...........................IPX0
Suction force .......... 16,5 kPA (165 mbar)
Metal container capacity,
gross ........................................... 18 l
actual .......................................... 14 l
Suction hose
Length ........................approx. 150 cm
Outside diameter ..........approx. 35 mm
Suction tube
Length suction tube +
crevice nozzle ..................approx. 40 cm
Diameter suction tube .......approx. 35 mm
Weight (incl. all
accessories) ..................... approx. 3,9 kg
GB
IE
II
17